Attached are the dimensions I used for the memory chips and the VRM areas on the 6700XT – the former is a standard dimension, the latter are of course different from GPU to GPU. The RAM uses 16 x 14 mm (the chip 15 x 13 mm) of space. For the VRM1 we need 56 x 7 mm and the VRM2 50 x 7 mm. These pads are needed in 1mm thickness and are – in the form of the Minus8 pads – also visible on two of the previous pictures. Here the whole thing now with the EC360 Blue Pads. By the way, you can see on the picture that, despite the planned cooler base, there is still a small “hump” – this comes from the GPU (I could hardly believe it myself, but the razor blade proved it).
- 1 - Hotbox de luxe - und nun?
- 2 - Pastentausch ohne Verbesserung
- 3 - Der Dreh mit dem Moment
- 4 - Druck und Überdruck
- 5 - Alles eine reine (Aus)Treiberfrage
- 6 - Nach fest kommt ab? Die Lösung!
- 7 - Sauber eingelocht!
- 8 - Die Montage (sind immer nervig)
- 9 - Angebrummt vom Feinsten
- 10 - Blutiger Splatter
- 11 - Edle Matschepampe
- 12 - Ein Pad im Kornfeld.. lala
- 13 - Richtig Maß genommen
- 14 - Auch ein schöner Rücken kann entzücken
- 15 - Klappe zu, Affe (nicht) tot
- 16 - Läuft und säuft, aber gut gechillt
- 17 - Einen haben wir noch
29 Antworten
Kommentar
Lade neue Kommentare
Veteran
Urgestein
Urgestein
Veteran
Urgestein
Urgestein
Urgestein
Veteran
Veteran
Mitglied
Urgestein
Urgestein
Urgestein
Urgestein
Urgestein
Urgestein
Urgestein
Alle Kommentare lesen unter igor´sLAB Community →