Monitors Practice Reviews

Samsung Odyssey OLED G8 in post-test – Firmware 1622 gives free rein to the AMD FreeSync Premium Pro pipeline with 1000 nits

HDR performance

If you wanted to use the 1000 nits peak brightness with an AMD GPU, you had to use a workaround such as GRU. And this is exactly what Samsung has fixed with FW 1622. I will also give you my settings here as a recommendation. This will give you a very good RGB balance. (Depending on the panel lottery and factory calibration, this may or may not work for you)

NVIDIA is known to look like this. Then you can make a better comparison with AMD. (The measurements are current) For further details, please refer to the article from six months ago.

Peak 1000 mode with the RTX 4090

HDR 1000 Nits NVIDIA

 

Personally, I always play with the RTX 4090 and I also use the Contrast Enhancer on low in HDR. I like the image much better there, even if it affects the EOTF tracking.

RTX 4090 Peak 1000 Nits Contrast Enhancer low @ 10 % APL

If you have an NVIDIA GPU connected to the OLED G8, you should give it a try. I like the picture much better. A matter of taste! But now to the corpus delicti…

Peak 1000 mode with the RX 6700 XT

Whether you set the tone mapping to off, basic or advanced doesn’t matter in the end, because it has no influence at all. Why does Samsung offer these setting options in conjunction with an AMD GPU? I have no idea. In conjunction with an NVIDIA GPU, it looks completely different, if you are interested, you should take another look at the article from December 2023.

HDR 1000 Nits AMD

 

True Black 400 with the RX 6700 XT

If you want the most accurate color possible, you should use this mode. Again, it doesn’t matter if you change the tone mapping. I always measure the same!

HDR True Black 400

 

The HDR True Black 400 mode makes no difference between AMD or NVIDIA. But that’s nothing new!

In AMD Peak 1000 Nits mode, the picture is much too bright compared to NVIDIA – and that basically over the entire EOTF. Samsung should improve this again. At least you can now use the maximum peak brightness. It is also a fact that the larger the APL becomes, the sooner the roll-off occurs. NVIDIA is hit much harder here than AMD. The bottom line is that you are trading too bright for too dark. Both should be improved by Samsung. Then I’ll come to the conclusion, last page.

 

 

Kommentar

Lade neue Kommentare

Averomoe

Mitglied

10 Kommentare 5 Likes

Auch wenn ich diesen Monitor nicht besitze, möchte ich ganz allgemein mein Lob zum Ausdruck bringen, dass ihr einen Nachtest gebracht habt.

Da Technik zunehmend beim Kunden reifen darf, sind solche Nachtests für viele entscheidend, um eine vernünftige Kaufentscheidung treffen zu können - leider nehmen nur die wenigsten Tech-Seiten die damit verbundene Mühe auf sich und man ist aif Foren wir reddit angewiesen, um entsprechende Erfahrungsberichte zu erhalten.

Gerne weiter so.

Antwort 4 Likes

RedF

Urgestein

4,963 Kommentare 2,810 Likes

Gamma ST.2084 ist bei mir ausgegraut.

Antwort Gefällt mir

FritzHunter01

Moderator

1,229 Kommentare 1,666 Likes
RedF

Urgestein

4,963 Kommentare 2,810 Likes

Ja, sollte. Ich schaue später aber nochmal.

Antwort Gefällt mir

FritzHunter01

Moderator

1,229 Kommentare 1,666 Likes

Du hast ne AMD Karte, dann hast du keinen Zugriff darauf. FreeSync Premium Pro remember….

Das Tonemapping macht die GPU

Antwort 1 Like

8j0ern

Urgestein

2,832 Kommentare 904 Likes

Oha, bei meinem TV habe ich das Problem nicht gehabt.
Auch die Spiele gehen inzwischen auf 1500 (HDR10+) hoch, allerdings musste ich dazu den Gaming Mode im TV Menü aktivieren und die Eingabelatenz auf "Beste".

Danke @ FritzHunter01 :)

Antwort Gefällt mir

D
Diiescher

Mitglied

27 Kommentare 1 Likes

Guter Test und prima, dass Samsung nachbessert und Du nachtestest.
Hier lerne ich jeden Tag dazu. Danke dafür :)

Was mir irgendwie aufstößt, ist, dass Samsung ohne Wissen der Nutzer Updates auf die Systeme aufspielt. Und sei es auch "nur ein Monitor". Oder habe ich das falsch verstanden und man kann das Updateverhalten irgendwo am Gerät einstellen?

Antwort 1 Like

C
ChaosKopp

Urgestein

576 Kommentare 614 Likes

Das Update wurde ja erst per angehängtem USB Stick erfolgreich durchgeführt.

Antwort 1 Like

S
SpotNic

Urgestein

1,105 Kommentare 474 Likes

Du kannst einstellen, ob das Autoupdate aktivierst oder nicht.

Antwort 2 Likes

lilux

Mitglied

62 Kommentare 48 Likes

Ich kann das nicht nachvollziehen. Mit der 1641 läuft bei mir HDR keineswegs mit 1000 cd² in der Spitze. Bin wieder zurück auf die Lösung mit CRU und dabei bleibe ich nun auch. Funktioniert ja prima.

Antwort Gefällt mir

RedF

Urgestein

4,963 Kommentare 2,810 Likes

Also um den Spieleprogrammierern die Zügel in die Hand zu geben.

Antwort Gefällt mir

8j0ern

Urgestein

2,832 Kommentare 904 Likes

Da gab es mein TV noch nicht einmal.

Baujahr 2021, Zertifiziert von der VDE.

Mit Protokolle, auf Anfrage im .pdf Format.

Antwort Gefällt mir

SoniX

Neuling

3 Kommentare 0 Likes

Gibt es Unterschiede zwischen der Firmware 1622 und 1641 bzw. Verschlechterungen bei HDR . Ich selbst hab eine 7900XT, würde gern updaten aber bin da jetzt auch nicht sicher ob bei HDR und AMD Karten es ein Rückschritt ist .:unsure:

Antwort Gefällt mir

RedF

Urgestein

4,963 Kommentare 2,810 Likes

Habe nichts bemerkt.

Antwort 1 Like

Danke für die Spende



Du fandest, der Beitrag war interessant und möchtest uns unterstützen? Klasse!

Hier erfährst Du, wie: Hier spenden.

Hier kannst Du per PayPal spenden.

About the author

Fritz Hunter

Werbung

Werbung