Optional components and new test system
Before I get to the build diary, I would like to briefly introduce the optional components that NZXT has made available to us as part of this case test. Thanks to the stylish AM5 mainboard, I also took the opportunity to “retire” the old test system, which is now a bit outdated, and carry out the case tests with a new platform from now on. More about this on the next page.
F-Series RGB single-frame fan
The star of the show are the new “Single-Frame” fans, which combine several 120/140mm RGB fans in a single frame.
Available in 240mm (€44.99), 280mm (€49.99) and 360mm (€69.99), the new fans offer a number of advantages over the single arrangement. These include simple installation, the avoidance of “cable clutter” and, of course, a particularly “clean” look.
The illumination of the fan shines through the clear elements on the side, creating a beautiful effect.
C-Series power supply units
Aris has already extensively tested the new C-Series power supplies with 80 Gold certification, here for example in the 1200W version. The 1500W version with 80 Platinum certification is now to form the new spearhead of the lineup.
The packaging has not changed, and the large version also comes well protected to the customer.
In addition to the brute power supply unit, there is also a practical bag for storing cables that are not in use.
Why “brute”? Because at 2350g, the power supply is definitely the most powerful power supply I’ve ever had in my hands.
The weight is due to the high-quality components and massive heat sinks.
![](https://www.igorslab.de/wp-content/uploads/2024/06/PSU_internals-980x980.jpg)
The ATX 3.1 power supply has a zero fan mode, which I highly recommend activating, as the built-in fan is unfortunately not incredibly quiet. Attention: unfortunately, standard IEC plugs do not fit into the connection on this power supply! I assume that this is simply to ensure that the IEC cable used has an adequate cable cross-section so as not to become a fire hazard when the power supply is at maximum power consumption.
N7 B650E Mainboard
To make the NZXT build perfect, the visually matching N7 mainboard is installed.
The modern AM5 board will also form the basis of my case test system in the future.
Visually, of course, an eye-catcher and a guarantee for a “clean” build.
S-ATA and USB 3 headers are hidden under the cover and arranged at a 90° angle.
The voltage converters are fitted with massive heat sinks.
In addition to the many headers on the board, the I/O on the rear also leaves nothing to be desired. In addition to many fast USB ports, we also find an optical output. A fast network connection is guaranteed with 2.5G LAN and WiFi 6E.
The NVMEs are hidden under magnetic covers, which are largely made of plastic and are therefore unlikely to have any significant cooling capabilities.
The primary (PCIe 5.0 compatible) slot, on the other hand, is equipped with a massive heat sink.
The included accessories are almost as minimalist as the design: apart from a few S-ATA cables, three NVME screws and the WiFi antennas, there is nothing else in the box.
CPU and RAM
The last two main components of the new test system will be a Ryzen 9 7900 and a DDR5 kit from Corsair. Of course, these parts were not provided by NZXT.
41 Antworten
Kommentar
Lade neue Kommentare
Mitglied
Neuling
Urgestein
Urgestein
Urgestein
Urgestein
Veteran
Urgestein
Urgestein
Moderator
Urgestein
Urgestein
Urgestein
Urgestein
Urgestein
Urgestein
Urgestein
Urgestein
Moderator
Alle Kommentare lesen unter igor´sLAB Community →