Komplett-PCs Reviews System

LincPlus LincStation N1 Mini-PC Review – 6-Bay Flash Homeserver with Intel N5105 and Unraid License

Summary and conclusion

My excursion into the world of Unraid was just as exciting as the LincStation itself. Visually, I liked both the UI of Unraid and the simple, elegant design of the system.

By the way: If you are bothered by the LED bar or would like to customize it to your own wishes, you can do so under the host name and port 50000.

The translation is rather poor, but you can still find your way around.

Apart from that, a few loose thoughts that I haven’t gotten rid of yet:

  • The mainboard can be found under the model name TVI8310X
  • 128GB eMMC memory is installed on the board, which cannot be used under Unraid
  • WLAN and Bluetooth chips are also not supported by Unraid
  • The computer beeps once when it is switched on
  • After setting up Unraid, 22.5 GB of storage space is occupied on the array
  • Upload of an .ISO file directly in the web file browser was extremely slow at 159 kbit/s
  • The internal 4GB USB stick looks identical to those in TerraMaster NAS devices

I would like to emphasize again that I could never quite reach the 2.5 Gbit in the download, even in several test runs. In the upload, however, I could, but I was unable to find a tangible reason for this. And even though I think the decision to simply deliver Unraid pre-installed with a license is a very good one, I have to wonder about the hardware. Because neither the 128GB memory, WLAN nor Bluetooth can be used by Unraid. If you could buy the LincStation N1 a little cheaper without the Unraid license, this question would not even arise.

With the code “LDS2” there is a 5% discount in the manufacturer’s own store. This is a referral link, but I do not accept any commissions offered by the manufacturer. Neither I nor IgorsLab earn any money by using the voucher code provided.

But this is not the case at the time of publication, there is no selection option. So you end up with a final price of 377 euros including the Unraid Basic license worth 53 euros. Especially in comparison with the Intel N100, however, it is clear that the N5105 installed here is somewhat underpowered. With an average of 2-2.5 times the CPU performance, the N100 is well ahead. We have already seen Mini-PCs with the N100 or N97 for less than 200 euros, but to be fair, I am not aware of any other system that can accommodate four M.2 and two 2.5″ drives and would be cheaper. The closest comparable offer would probably be the Asustor FS6706T All-Flash NAS. With an identical processor and similar features, it currently costs 530 euros, but also comes with 6x M.2 slots. So if you are looking around in this niche and need SSD network storage, the LincStation N1 could be of interest. However, it should still have a little more CPU power.

[wonderplugin_slider id=17]

The test sample was provided by LincPlus without obligation. There was and is no influence on the tests and results. There was also no compensation for expenses and no obligation to publish.

Kommentar

Lade neue Kommentare

B
Besterino

Urgestein

7,056 Kommentare 3,639 Likes

Danke. Das Bild mit den Einschüben für die 2 SATA-SSDs hättest Du gerne vorne bringen dürfen. :) Hab mich schon gefragt, ob ich da was falsch verstanden habe, bis ich auf der letzten Seite angekommen bin.

Hast du mal probiert, nen anderes OS zu installieren? Kommt man unproblematisch ins BIOS?

Antwort 1 Like

e
eastcoast_pete

Urgestein

1,830 Kommentare 1,142 Likes

@Tim Kutzner : Interessanter Test und Artikel! Gerne mehr zur Schnittmenge Kraftzwerge - Home Server.
Und, irgendwie schon bemerkenswert, daß sich auch am unteren Ende der Leistungs- und Kostenklasse doch einiges getan hat. Die 4 Gracemont Kerne in dem N100 sind dem alten Celeron der hier verbaut wurde doch um einiges vorraus. Ist auch (aus meiner Sicht) einer der Dinge, die ich an der LincStation wirklich geändert sehen wollte, bevor ich mir so eine zulegen würde. Warum werden da immer noch Jasper Lake Celerons verbaut?

Antwort Gefällt mir

Tim Kutzner

Moderator

888 Kommentare 730 Likes

Ins BIOS kommt man ohne Probleme, ein anderes OS zu installieren sollte kein Problem sein.
Habe ich aber nicht ausprobiert, wenn man schon für Unraid zahlt ... :D

Antwort 1 Like

Tim Kutzner

Moderator

888 Kommentare 730 Likes

Gute Frage, keine Ahnung. Aber kaum ist der Artikel hier raus, hat sich LincPlus nochmal wieder gemeldet und ein paar neue Informationen zukommen lassen ;)

Antwort 2 Likes

V
Vollkornprophet

Mitglied

28 Kommentare 10 Likes

Vielleicht kann ein alternatives Linux ja auf die unter Unraid nicht verfügbaren Geräte zugreifen. 🤷🏼‍♂️

Antwort Gefällt mir

Asghan

Mitglied

25 Kommentare 16 Likes

Es sollte problemlos gehen einfach z.B: OMV auf den eMMC Storage zu installieren und den Unraid USB Stick zu entfernen.

Antwort Gefällt mir

Asghan

Mitglied

25 Kommentare 16 Likes

Baust du die gerade ein als Update :)

Antwort 1 Like

Tim Kutzner

Moderator

888 Kommentare 730 Likes

Nein, dazu kommt nochmal was Eigenes

Antwort 2 Likes

c
cunhell

Urgestein

575 Kommentare 549 Likes

Unraid gibt es nur noch als Abo-Modell. Man spart sich also nur die Einstiegskosten. Betreibt man es mit Support weiter, kostet es ab dem zweiten Jahr Supportgebühren.
Das sollte man wohl fairerweise erwähnen.

Ansonsten schöner Artikel über interessante Hardware.

Cunhell

Antwort 2 Likes

Lagavulin

Veteran

267 Kommentare 233 Likes

Vielen Dank für den Test!

Ich frage mich, wie das mit den Temperaturen bei 4TB-SSDs aussieht. Wenn man sowieso schon einen Lüfter wegen der CPU drin hat, wäre es dann nicht cleverer gewesen, die SSDs ins Innere des Gehäuses zu verlegen und mit Kühlkörpern zu versehen (so, wie man das auf Motherboards macht)?

Antwort Gefällt mir

e
eastcoast_pete

Urgestein

1,830 Kommentare 1,142 Likes

Ich dachte, es gibt noch eine Kaufversion, aber daß der Preis dafür mittlerweile gesalzen ist. Das hält mich auch davon ab, Unraid auch nur auszuprobieren.

Antwort Gefällt mir

e
eastcoast_pete

Urgestein

1,830 Kommentare 1,142 Likes

Das "Auslagern" der SSDs kann uU ein großer Vorteil sein. Bei einigen passiv gekühlten Home Server Setups, die man zB auf AliExpress kriegt, sind die SSDs im Gehäuse untergebracht. Nachteil (IMHO): die SSDs werden dann von der Abwärme der CPU und der 10 Gbit Adapter gut beheizt. Zum Teil hört und liest man da von Temperaturen deutlich über 80 °C. Bei einem System mit aktiver Lüftung käme es wahrscheinlich darauf an, wie gut der Lüfter die Temperaturen im Griff hat, und ob der Luftstrom auch die SSDs mit abdecken kann.
@Tim Kutzner : hab ich's überlesen, wie warm die SSDs hier wurden?

Antwort Gefällt mir

e
eastcoast_pete

Urgestein

1,830 Kommentare 1,142 Likes

Und, als Nachtrag und Frage: gibt's die LincStation auch mit Trays, die 3.5 Zoll HDDs aufnehmen kann?

Antwort Gefällt mir

c
cunhell

Urgestein

575 Kommentare 549 Likes

Stimmt, hatte ich überlesen. Man kann für 249$ eine Dauerlizenz incl. Updates kaufen.
Bei allen anderen muss man wohl regelmässig blechen, wenn man Updates will.

Cunhell

Antwort 1 Like

Squaracas

Neuling

9 Kommentare 2 Likes

Ich habe selbst 2 von denen und mir dazu per Syncthing ein Ortsunabhängiges Sync gebaut.
Backup der Dockercontainer und wichtiger Verzeichnisse in ein Verzeichnis mit dem Plugin Appdata Backup und dieses Verzeichnis in Syncthing eingebunden und auf die zweite Kiste, die in einem anderen Ort steht.

Antwort Gefällt mir

Squaracas

Neuling

9 Kommentare 2 Likes
_
_roman_

Veteran

122 Kommentare 33 Likes

Warum man keine übliche CR2032 Knopfzelle verbaut?

Danke für die Bilder vom inneren Aufbau.

Für das folgende wäre die Angabe vom Datenträger besser.
z.b. gemessen mit Crucial P5 Plus 1TB (Variante ohne Kühlkörper)

Jetzt könnte man raten welcher Datenträger es ist, oder schauen ob es irgendwo anders erwähnt wurde.
TB Größe / DRAM JA / Nein / Kontroller usw.

Nicht jeder Datenträger gibt sich zu erkennen
z.B.
11:00.0 Non-Volatile memory controller: Phison Electronics Corporation E18 PCIe4 NVMe Controller (rev 01)

Antwort Gefällt mir

Danke für die Spende



Du fandest, der Beitrag war interessant und möchtest uns unterstützen? Klasse!

Hier erfährst Du, wie: Hier spenden.

Hier kannst Du per PayPal spenden.

About the author

Tim Kutzner

Supporting force on cooler, periphery and 3D printing arcticles.
Linux novice and wanna-be datahorder with DIY NAS.

Werbung

Werbung