Unboxing and scope of delivery
The PSU comes in a nicely designed package that offers good protection. The package is rich and includes Velcro straps, side stickers for the PSU, an ATX jump-start connector, mounting screws, and two brochures. There is also a bag to store unused modular cables.
The matte coating looks scratch-resistant, and the die-cut fan grille has a nice, non-restrictive airflow design. On the front, in addition to the power switch, there is another smaller switch for turning the semi-passive fan mode on and off. There are thirteen slots on the back, one of which is for the PCIe 5.0 connector.
The cables are long enough, and there are enough ports to build a powerful system. It would be nice if the EPS and the 6 2-PCIe connectors had thicker diameters.
Modular Cables | ||||
Description | Cable Count | Connector Count (Total) | Gauge | In Cable Capacitors |
---|---|---|---|---|
ATX connector 20 4 pin (600mm) | 1 | 1 | 18-22AWG | No |
4 4 pin EPS12V (700mm) | 2 | 2 | 18AWG | No |
6 2 pin PCIe (650mm 150mm) | 2 | 4 | 18AWG | No |
6 2 pin PCIe (500mm 150mm) | 1 | 2 | 18AWG | No |
12 4 pin PCIe (700mm) | 1 | 1 | 16-24AWG | No |
SATA (500mm 150mm 150mm) | 2 | 8 | 18AWG | No |
SATA (500mm 150mm) / 4-pin Molex ( 150mm 100mm) | 2 | 4 / 4 | 18AWG | No |
SATA (500mm 150mm) / 4-pin Molex ( 150mm) / FDD ( 150mm) | 1 | 2 / 1 / 1 | 18-22AWG | No |
AC Power Cord (1350mm) – C13 coupler | 1 | 1 | 18AWG | – |
Protection
The OCP trip points are set correctly on all rails. The same is true for the overvoltage protection. Over-temperature protection tripping seems to be low, but I didn’t notice any problems during testing, and I put a particularly heavy load on the unit.
OCP (Cold @ 21°C) | 12V: 105.2A (126.25%), 12.141V 5V: 24.2A (121%), 5.033V 3.3V: 25A (125%), 3.335V 5VSB: 3.8A (152%), 5.021V |
OCP (Hot @ 41°C) | 12V: 104.8A (125.77%), 12.152V 5V: 22.1A (110.5%), 5.044V 3.3V: 22.5A (112.5%), 3.343V 5VSB: 3.9A (156%), 5.021V |
OPP (Cold @ 27°C) | 1277W (127.7%) |
OPP (Hot @ 44°C) | 1272.06W (127.21%) |
OTP | ✓ (97°C @ secondary side) |
SCP | 12V to Earth: ✓ 5V to Earth: ✓ 3.3V to Earth: ✓ 5VSB to Earth: ✓ -12V to Earth: ✓ |
PWR_OK | Proper operation |
NLO | ✓ |
SIP | Surge: MOV Inrush: NTC Thermistor & Bypass relay |
On the next page we now go inside, please turn the page!
- 1 - Introduction, technical data and test report
- 2 - Unboxing, cables and protection
- 3 - Teardown: topology, components, craftmanship
- 4 - Load Regulation, Ripple Suppression, Transient Resonse
- 5 - Hold-Up Time, Timings, Inrush-Current
- 6 - Average Efficiency and PF
- 7 - Noise and fans
- 8 - Summary and conclusion
28 Antworten
Kommentar
Lade neue Kommentare
Veteran
Urgestein
Urgestein
Veteran
1
Urgestein
Veteran
Mitglied
Urgestein
Mitglied
Veteran
Mitglied
Urgestein
Veteran
Urgestein
1
Urgestein
Urgestein
Urgestein
Alle Kommentare lesen unter igor´sLAB Community →