Temperature behavior
I used the original 4 Endorfy Stratus ARGB 140 mm fans as case fans and the Sapphire Nitro S360-A AiO water cooling system as CPU cooling.
Settings
Room temperature | 22.5 degrees Celcius |
Case fans | 700 RPM minimum – 1,300 RPM maximum |
Pump AiO on | 1.400 RPM minimum – 2,800 RPM maximum |
AiO fans | 900 RPM minimum – 2,500 RPM maximum |
Additional fan: | 1x Seasonic Magflow under the power supply cover 1,000 RPM minimum – 2,000 RPM maximum |
CPU benchmark test
The benchmark test for the CPU ran on the new Cinebench 2024, which I used there. The case fan, AiO and pump ran relatively quietly during the test. I first ran the test in multicore:
There the CPU ran at max. 80 degrees Celcius. I think the temperature can certainly be reduced even further with other, higher quality fans. The single-core test produced the following results:
GPU benchmark test
The benchmark test of the aforementioned GPU produced the following results in the case:
There, the hotspot was almost 91 degrees Celscius. I would therefore definitely recommend using other case fans, although the average temperature was 52 degrees Celsius and peaked at 56 degrees Celsius.
Conclusion
I quite like the design of this case from Endorfy, but all the little flaws that I gradually noticed somehow ruin the overall picture, which was so nice at the beginning. Especially as many parts of the case seem a little too thin-walled. The supplied fans are quite quiet, but you could achieve a lot more airflow by switching to another manufacturer. What I did like, however, was the relocation of the I/O panel to the right-hand side of the case, so that you really had a lot of space for cable management.
The bottom line is that anyone looking for a case with space for a large AiO water cooling system will find what they are looking for at Endorfy. The price, including the fans and the small controller, is also more or less justified, but it’s not exactly a battle cry. Also and above all because of the minor shortcomings.
ENDORFY Arx 700 ARGB, Glasfenster (EY2A013)
Lagernd, Lieferung 1-2 WerktageStand: 14.08.24 20:05 | 115,90 €*Stand: 14.08.24 20:07 | |
Lieferzeit 5-8 Werktage | 116,88 €*Stand: 14.08.24 19:51 | |
sofort lieferbar | 116,90 €*Stand: 14.08.24 19:55 |
24 Antworten
Kommentar
Lade neue Kommentare
Moderator
1
Urgestein
Veteran
Veteran
Mitglied
1
Veteran
Urgestein
Veteran
Urgestein
Urgestein
Veteran
Veteran
Veteran
Veteran
Urgestein
Urgestein
Alle Kommentare lesen unter igor´sLAB Community →