Dimensions
Due to the minimal protrusion of the heat sinks over the PCB, the modules reach a total length of around 138 mm, but this effectively means no restriction for accessing the DIMM slot latches.
The height of the Vengeance RGB bars is just under 45 mm and 42 mm from the upper edge of the DIMM slot, which should not be a problem for most coolers.
For completeness, we also measure the width with 7 mm, which visually fills the DIMM slot well from above, but still allows airflow between neighboring modules even with a small slot distance. There is nothing to complain about here.
RGB lighting
The modules look even more impressive when they are energized, with very strong and even color gradients along the upper side. The printed Corsair logo is also a chic visual contrast. There are no single luminous points visible to the naked eye, only my camera is a bit more sensitive here. Of course, the RGB lighting with its 10 LEDs can be controlled as desired with Corsair’s iCUE software or even turned off if you want to.
The play of colors is now shown again in a few individual pictures.
- 1 - Unboxing and Design
- 2 - Dimensions and RGB lighting
- 3 - Heatsink test and SPD information
- 4 - Teardown and PCB analysis
- 5 - Overclocking and test systems
- 6 - Synthetics (1/2) – Linpack Xtreme, AIDA64, Geekbench 3
- 7 - Synthetics (2/2) – SuperPI 32M, Pyprime 2.0 2B, Timespy CPU
- 8 - Gaming QHD and FHD – ACC, SoTR, CS:GO
- 9 - Zusammenfassung und Fazit
15 Antworten
Kommentar
Lade neue Kommentare
Neuling
Veteran
Veteran
Veteran
Urgestein
Mitglied
Veteran
Veteran
Veteran
Mitglied
Veteran
Mitglied
Veteran
Mitglied
Alle Kommentare lesen unter igor´sLAB Community →