Komplett-PCs Reviews System

Beelink EQR6 Mini-PC in test – Ryzen 7735HS, 24 gigabytes of RAM and an internal power supply unit

Internal structure

If you want to take a look inside, you first have to fiddle out the small rubber covers with a needle or similar.

Four screws later, the underside can be removed using the integrated tab, which at least is very easy.

Both the RAM and the SSD are from Crucial. The two somewhat curious 12GB DDR5 4800Mhz modules can be found under the model designation CT12G56C46S5.M4B1, while the 1TB SSD is of the CT1000P3PSSD8 type.

The factory-installed SSD is not easily accessible, as it is located under two levels of passive heat sinks. However, a second M.2 SSD can easily be added. Incidentally, an Intel AX200 takes care of WiFi6 and Bluetooth 5.2 and the two Gigabit LAN ports are each supplied by a Realtek RTL8168/8111 Ethernet controller.

Kommentar

Lade neue Kommentare

e
eastcoast_pete

Urgestein

1,853 Kommentare 1,159 Likes

@Tim Kutzner : danke für den Test!
Für um die € 300 wäre der 7735 (Rembrandt Refresh) okay, aber wie Du auch schreibst, muss man bei etwaiger Bestellung aufpassen, was man da bekommt.
Und bei der Zahl der Anschlüsse , v.a. von USB3 C hätten es gerne noch 1-2 mehr sein dürfen. Andere BeeLink Kraftzwerge sind da "anschlussfreudiger".
@ BeeLink: Send one of your new Strix ("AI") APU Systems to @Tim Kutzner, so he can test it! Your potential customers read his reviews!

Antwort Gefällt mir

C
CKBVB

Mitglied

85 Kommentare 45 Likes

Ich finde das interne Netzteil eher problematisch, denn wenn etwas kaputt geht ist es zu 99% das Netzteil. Extern ist es für 10 bis 20 EUR schnell getauscht, intern wird es schwierig.

Antwort Gefällt mir

Tim Kutzner

Moderator

893 Kommentare 734 Likes

Das ist richtig.
Ich muss fairerweise aber auch zugeben, dass ich mich nicht daran erinnern kann, wann mir zuletzt ein Netzteil kaputtgegangen ist.
Weder intern noch extern :D

Antwort 1 Like

p
pinkymee

Veteran

130 Kommentare 157 Likes

Ich hab auf der Arbeit von DELL's Latitude 5420 und 5430 gehäuft defekte Netzteile in diesem und letzten Jahr gehabt. So unwahrscheinlich ist es also gar nicht. War übrigens immer der gleiche Typ Netzteil ;) Aber wenn mal der Wurm in Form eines Designfehlers drin ist, könnte man durchaus Pech haben.

Antwort 1 Like

e
eastcoast_pete

Urgestein

1,853 Kommentare 1,159 Likes

Gerade bei mobilen Geräten und Kraftzwergen ist mir auch aus dem Grund ein externes Netzteil lieber. Bei Notebooks ist es (IMHO) besonders vorteilhaft, die Abwärme des Netzteils nicht im Gehäuse zu haben. Und heutzutage (mit USB-C Netzteilen) muss man ja oft sowieso immer eines dabei haben, um auch das Smartphone laden zu können.

Antwort Gefällt mir

e
eastcoast_pete

Urgestein

1,853 Kommentare 1,159 Likes

Auf Englisch, damit BeeLink einfacher (mit)lesen kann:
@Tim Kutzner : any chance that you could review the combination of one of the three Intel-based mini PCs with the very interesting PCIe-4 docking station for an external GPU that BeeLink now has? Unlike setups that connect the dGPU through Thunderbolt or OCuLink, this one allows connecting an external GPU through 8 PCIe-4 lanes. I'm sure I wouldn't be the only one who would be tempted, but I want to read a review by a trusted reviewer first.

Weiter auf Deutsch: jetzt weiß ich natürlich nicht, ob Du (@Tim Kutzner ) bei Herstellern wie BeeLink auch direkt nach interessanten Kandidaten für Deine Tests anfragen kannst, aber diese Lösung (im wesentlichen ein PCIe-4 Riser plus dedizierte externe PSU für die dGPU) ist bis jetzt diejenige, die mich am meisten reizen würde.

View image at the forums

Was ich auch interessant fand: in einer Antwort auf der Support Seite für die Docking Station auf die Frage, warum sowas nicht für einige der schnellen AMD Kraftzwerge angeboten wird, antwortete BeeLink, daß die APUs und Boards/Chipsets (für das Mini-PC Format) dafür nicht genügend PCIe Bahnen bereitstellen können bzw würden. Wieder was gelernt 😀.

Antwort Gefällt mir

Klicke zum Ausklappem

Danke für die Spende



Du fandest, der Beitrag war interessant und möchtest uns unterstützen? Klasse!

Hier erfährst Du, wie: Hier spenden.

Hier kannst Du per PayPal spenden.

About the author

Tim Kutzner

Supporting force on cooler, periphery and 3D printing arcticles.
Linux novice and wanna-be datahorder with DIY NAS.

Werbung

Werbung