Commissioning
We can then continue with the setup of the printer itself, which should ideally be set up in its final location.
First we are asked for the desired language and our region, whereby at the time of testing only English and International were available for selection. We can then establish a Wi-Fi connection, but this step can also be skipped if you prefer.
To be able to show everything, I established the connection and was then allowed to pair an account and app.
Auto-bed leveling and a resonance measurement are then carried out automatically.
Immediately afterwards, we are greeted by a very detailed firmware update message.
Slicer
I used AnycubicSlicer version 1.4.4 for my tests, but its download page can only be accessed via Google search. On the manufacturer’s website, the side navigation bar is not functional, so I can’t click on the entry, at least in my case. A good start.
Here is a first look at the software based on the PrusaSlicer. To be able to transfer jobs directly to the printer, it must first be added via account or number code in the menu.
I connected any webcam and the slightly jerky and pixelated stream appeared in the Workbench. However, it is completely sufficient for the purpose of monitoring for printing errors.
Interestingly, a function for generating printable images is directly integrated, which is remotely reminiscent of HueForge. A detailed description of this feature can be found on the Anycubic wiki page.
However, it is not clear to me why you can only set temperatures for preheating on the printer itself and not remotely.
When you start a job, you can select a free printer from the fleet, which might be useful for farms.
Inking for multicolor printing works like in PrusaSlicer or Bambu Studio, so it’s relatively easy.
Before starting, the assignment of filament and color can be adjusted again.
If the object consists of several parts, these can also be quickly colored as a whole using the drop-down menu.
The division looks a little strange on a large monitor, and the dark mode set for the rest of the slicer does not work in this window either.
6 Antworten
Kommentar
Lade neue Kommentare
Veteran
Moderator
Veteran
Moderator
Veteran
Urgestein
Alle Kommentare lesen unter igor´sLAB Community →