Test setup
By popular demand, I’m going for a closed system in the form of a PC specially assembled for igor’sLAB by MIFCOM (exemplary product link, not an affiliate) this time. The case used is really good, has enough internal volume and also an excellent airflow. The used AiO compact water cooling in the form of Be Quiet’s Silen Loop II visually matches the GeForce RTX 4080 FE and the RGB accents of the RAM and motherboard can either be set to plain white or turned off completely in case of doubt. When things get too colorful again.
I deliberately did without all the bling-bling in my configuration, but use a current AMD CPU and a solid motherboard for the potent underpinnings. Here are a few pictures of my test system from the lab including the NVIDIA RTX 4080 Founders Edition 24GB tested today:
The PC was assembled nice and neat by MIFCOM (I’m always like that with the cables) and can be purchased in this configuration (see below) exactly the same or modified at the dealer. It was simply important to me here to use a commercially available solution and not my extremely chilled lab hardware in the climate oasis. There is enough space between the side panel (glass) and the graphics card and the storage space of the XL case was not even close to being used. Thus, even all other RTX 4080s (and RTX 4090s) still have enough room to breathe. So that should fit. I also only need two fans in the front.
However, the measurement of the detailed power consumption and other, more in-depth things is done in the lab on two tracks using high-resolution oscilloscope technology (there are also various follow-ups!) and the self-created, MCU-based measurement setup for motherboards and graphics cards (pictures below) or NVIDIA’s PCAT. For this, of course, I use a redundant system, with the same components, because such measurements in the housing are rather difficult.
The audio measurements are done outside in my Chamber (room within a room).
I have also summarized the individual components of the test system in a table:
- 1 - Introduction, technical data and technology
- 2 - Test system and the igor'sLAB MIFCOM-PC
- 3 - Teardown: PCB, components and cooler
- 4 - Gaming performance WQHD (2560 x 1440 Pixels)
- 5 - Gaming performance UHD (3840 x 2160 Pixels)
- 6 - Gaming performance UHD + DLSS/FSR/XeSS (3840 x 2160 Pixels)
- 7 - DLSS 3.0 and the longest benchmark bars
- 8 - NVIDIA Reflex and latencies
- 9 - Workstation performance
- 10 - Power consumption, load levels and standards
- 11 - Transients and PSU recommendation
- 12 - Temperatures, clock rates, OC, fans and noise
- 13 - Summary and conclusion
168 Antworten
Kommentar
Lade neue Kommentare
Urgestein
Veteran
1
Veteran
Mitglied
Urgestein
Veteran
Moderator
Veteran
Urgestein
Mitglied
Veteran
Urgestein
Veteran
Mitglied
Neuling
Urgestein
Urgestein
Alle Kommentare lesen unter igor´sLAB Community →